|
Prefeeders
|
|
The FeedMAX design offers many benefits including: improved performance, increased productivity, safety enhancements, ease of operation and simple maintenance.
Features include:
- Automatic warp compensation
- Block priming
- Automatic stack centering
- AutoSet option
- High speed throughput
- Accepts 72” high stacks
- 90” tall stacks optional
- Readily accessible lock-out pins
- Ease of use
- Facilitates customer compliance with NFPA 70E
|
|
|
High Speed Top Feeder
 |
The High Speed Top Feeder is specifically
designed for use with the new-generation 38” / 1-meter class
top-printing flexo folder gluers now being introduced into the North
American converting industry. The High Speed Top Feeder delivers sheets
at speeds that exceed the top line speeds of these finishing machines.
This allows higher overall line productivity and high operating reliability. |
| |
|
The SBF II is a machine that feeds a converting machine with a controlled stream of board. It will increase the efficiency and speed of a line, allow for inspection for individual boards and reduces the amount of misfeeds due to a sheet by sheet filling of the hopper.
The SBF II can be adapted to various sizes of converting machines and can handle various fluting.
The Special Block Feeder mark II is an automatic Prefeeder suited for feed bottomprinting and upfolding machines. It receives each time one stack, with or without pallet, from a floor conveyor. |
| |
|
Top Feeder
 |
The FEEDMASTER®
Top Prefeeder feeds blanks into a finishing machine in a continuous
shingled stream. It receives a stack of material, divides it into
blocks, turns each block and shingles it on the extendo conveyor.
The FEEDMASTER® Top Prefeeder is recommended for top printing
machines between 38 x 97 and 66 x 115.
|
| |
|
Mini Feeder
Play Video |
The Mini Feeder is specifically designed to meet the special demands
of high-speed, small-blank operation found on today’s mini
flexo lines. The machine is designed to provide maximum control
of small blanks as they travel from infeed conveyor lines into the
hopper of the flexo, while at the same time providing stability
of the incoming stacks.
|
| |
Block Push Universal Feeder
 |
The FEEDMASTER® Universal Feeder automatically
feeds blanks into a finishing machine in a continuous shingled stream.
It receives a stack of material, then divides it into blocks. The
blocks can be turned or pass through without being turned. A combination
pattern can also be selected that turns a certain number of blocks,
then passes through an equal number. The material is then shingled
on the extendo conveyor.
The FEEDMASTER® Universal Block Push Feeder
handles applications that require inverted and non-inverted stock. It is recommended for both top and bottom printing machines between 38" x 97" and 66" x 115".
|
|
Jumbo Top Feeder
 |
The FEEDMASTER® Jumbo Top Feeder
is designed to handle large sized blanks. It receives stacks of
material, divides them into blocks, turns the blocks and feeds them
into a finishing machine in a continuous shingled stream.
The FEEDMASTER®
Jumbo Top Feeder is recommended for top printing machines larger
than 66" x 115". |
|
Jumbo Bottom
Feeder
 |
The FEEDMASTER® Jumbo Bottom Feeder
is designed to handle large-sized blanks. It receives stacks of
material, divides them into blocks and feeds them into a finishing
machine in a continuous shingled stream.
The FEEDMASTER® Jumbo Bottom Feeder
is recommended for bottom printing machines larger than 66" x 135". |
| |
For more information
Contact Your Regional Representative
|
